Eurotek Tuning Plug 'n' Play Haltech Elite 2500 kit for Noble M12/M400

The original Noble M12/M400 ECU had an archaic software architecture which limited alot of benefits found in a modern vehicle ECU. This presented its own problems when an owner wanted to upgrade the tuning in the ECU. To make matters worse, the original setup did not include the safety of knock sensors and only utilized narrow band 02 sensors. These limitations created more risk when the vehicle was modified or tuned. Common issues like Bad fuel, low fuel pressure, a blown map sensor line or defective map sensor could all potentially, permanently damaged an engine.
This created the need to develop a more modern, smarter, upgradable ECU setup for these beautiful cars.

We teamed up with Haltech and put countless hours in developing this kit. This kit will ship complete with the following:
- Haltech Elite 2500 ECU
- Plug and play harness that plugs from the factory header connectors to the Elite 2500 as well as an extention harness for the Knock sensor
- Haltech WB2 Dual wideband controller kit which also inludes new wideband Bosch 4.9LSU Oxygen sensors
- Bosch Knock sensor along with mounting hardware and extention harness
- Haltech HPI6 ignition module
- Installation procedures
- base map that will get your car to start and idle
- Mounting hardware

The ECU will not be locked and thus will allow the opportunity for the owner to either use his own tuner and take advantage of 1 of our up and coming tuning options. This kit will also be the basis for future upgrades such as Drive-by-wire, GPS speed control, Digital dash, Flex fuel kits, etc. We designed the harness to allow for thse future expansions to be mustly plug and play as well.
This kit fits all M12, M12 GTO, M12 GTO 3R, M400 models.
please confirm your original MBE ECU is a 975D. If not please reach out to us info@etektuning.com or 888-967-5634 to confirm fitment.

This kit made for a massive positive impact in how the Noble drives, reponds, accelerates. the functionality of this kit on the Noble makes for hands down the BEST UPGRADE you can ever do to this vehicle.


Please allow 4-6 weeks as we produce these kits in small batches before shipping.