Haldex Gen 4 Tuner for Passat, CC, & Tiguan 4Motion

The Haldex Performance Part will greatly improve the performance and handling of your 2008.5-up VW Passat 4-Motion, CC and Tiguan. The kit consists of a new electronically controlled valve body, gasket, necessary hardware and installation instructions.

By re-tuning your vehicle's AWD system, power is more aggressively directed to the rear wheels under a wide variety of driving conditions. This results in more neutral handling characteristics and better off the line acceleration. This system does not intefere with ABS or Traction Control Systems.

Features:
The performance software for Gen 4 has an option where the driver can choose between 3 different parameter settings.
Option 1.
As default when no Switch or Remote Control is installed the software is fixed in Race mode which will give the car a sportier and more netural handling performance.
Option 2.
Installing a switch that can be mounted on the dashboard or remote control the driver will have the ability to choose between 3 different parameter settings:

Eco. Developed for fuel efficiency and increased durability of driveline parts. This tuning reduces the
torque transfer during normal highway driving (coasting), but will immediately engage the system
if a wheel starts to slip to prevent decreased traction capabilities.This mode is recommended to be used when 4 wheel drive is not a high priority as in highway driving, commuting etc.

Stock. Standard mode is similar to the original setting in the standard vehicle.
This mode is recommended to be used for normal driving.

Race. Race mode will increase close to maximum torque transfer to the rear axle during
accelerations and active driving. It also reacts faster due to the driver’s intentions and locks up
for more torque before actual torque is available from the engine.

All safety features works as in the original software, for example during ABS braking
or an ESP intervention the coupling will stop transferring torque to avoid
interference with the cars safety systems.

Notes:

For 2008 vehicles: Haldex units that start with Part # 0AV use Gen 2, units with Part # 0BS or 0AY use Gen 4.

This a simple plug-n-play application, no modifications necessary!

Replaces original equipment Haldex control unit.