Burger Motorsports JB+ for 2011+ Mini Cooper S N18 Turbo
Description
MINI Performance Parts: Burger Motorsports JB+ for 2011+ Mini Cooper S N18 Turbo (BMSJBN18)
Product Features & Benefits
JB+ adds up to 20whp and 30wtq
Featuring quick plug and play installation the N18 JB+ adds up to 20whp and 30wtq to your N18 equipped MINI. Fuel economy is unchanged during normal driving and the tuning works in conjunction with the DME rather than against it ensuring optimal but more aggressive boost levels with air/fuel ratios and timing to match. Boost is increased 2-4psi on average depending on the climate and conditions. Unlike other N18 piggyback tuners this one actually works and completely transforms the driving experience. This is how the car should have come tuned from the factory. Will be fully upgradable to higher stages when released. Literally installs and removes in less than 20 seconds.
Additional Details
Fits:
• 2011+ MINI N18 turbocharged engine
* This Racing Product Is For Competition Closed Course Use Only
Click Here for Installation Instructions.
Emissions Notice to Customers in California
Burger Motorsports, LLC has ceased selling performance parts in California. If you previously purchased competition use only performance parts from Burger Motorsports, please refer to the information below.
Burger Motorsports, LLC sells both replacement and competition use only performance parts. Competition use only parts are clearly labeled as competition use only in the product listing page and may only be used according to the guidelines posted below.
California regulates automobile aftermarket parts that have the potential to impact emissions. In most cases, the sale and use of emissions related aftermarket parts on automobiles is prohibited unless it is either a "replacement part" as defined by California, or is a specifically authorized use of that part as reflected in an Executive Order ("EO Part.")
The California Air Resources Board (ARB) regulates aftermarket parts and has promulgated regulations that essentially place all emissions related aftermarket parts into three categories:
(1) Replacement Parts Replacement Parts are aftermarket parts that ARB considers to be functionally equivalent to the stock part they are intended to replace, and therefore would not impact the emissions from these vehicles. These parts are appropriate for sale and use on automobiles used on or off the public highways. For aftermarket exhaust systems and parts, there are two applicable scenarios:
(a) If the automobiles stock exhaust system does not contain a catalytic converter, then an aftermarket exhaust part is a replacement part as long as the part does not remove or replace any emission control equipment originally attached to the stock exhaust system, such as oxygen sensors.
(b) If the automobiles stock exhaust system contains a catalytic converter in the manifold section of the stock exhaust system, then an aftermarket muffler positioned downstream from the catalytic converter (i.e. cat-back) is a replacement part as long as the part does not remove or replace any emission control equipment originally attached to the stock exhaust system.
(2) Executive Order Parts Executive Order Parts are aftermarket parts that ARB has evaluated and determined do not adversely impact emissions, and thereby are granted an Executive Order (EO), which allows the part to be sold and used on specified automobiles. Any aftermarket exhaust system that replaces or otherwise impacts emission control equipment, including catalytic converters, requires an EO to be sold and used on a automobile used on or off a public highway.
(3) Competition Use Only Parts may not be sold or used on an automobile that is used on or off the public highways other than those automobiles used exclusively for competition. Competition Use Only Parts are aftermarket parts that replace or otherwise interfere with the operation of an emission control device, such as a catalytic converter or oxygen sensor, and may be sold and used on an automobile that is used only for closed course competition.
THESE PARTS ARE LEGAL FOR USE ONLY IN COMPETITION RACING VEHICLES AS DEFINED UNDER CALIFORNIA LAW, AND ARE NOT LEGAL FOR USE IN ANY OTHER MOTOR VEHICLE. California law defines a "racing vehicle" as "a competition vehicle not used on public highways." (Calif. Health & Safety Code 39048) These parts may only be used on competition racing vehicles operated exclusively on a closed course in conjunction with a sanctioned racing event. Competition-only motor vehicles may not be driven to a racing event on a public highway and must be transported on a trailer or other carrier. USE OF THESE PARTS IN ANY OTHER VEHICLE MAY SUBJECT YOU TO FINES AND PENALTIES FOR VIOLATION OF FEDERAL AND/OR STATE LAW, WILL VOID YOUR WARRANTY FROM BURGER MOTORSPORTS, LLC, AND CAN VOID YOUR VEHICLE'S WARRANTY. It is your responsibility to comply with all applicable federal and state laws relating to use of these parts, and Burger Motorsports, LLC hereby disclaims any liability resulting from the failure to use these parts in compliance with all applicable federal and state laws.
10% OFF Installation
Save 10% off installation if you're a local to Las Vegas, NV by visiting our local shop, Eurotek Tuning. Call 888-967-5634 to make an appointment today.
Details
- BMSJBN18
- BMSJBN18
- Burger Motorsports
- Direct Ship (shipping times may vary)
- New
Categories
Shipping Information
- Item Requires Shipping
- 3.0 lbs.
- Free Shipping
- Direct Ship (shipping times may vary)
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!